Action
Load specified TIMER with a reload value.
Syntax
LOAD TIMER , value
Remarks
TIMER |
TIMER0 , TIMER1 or TIMER2(or valid timer name) |
Value |
The variable or value to load. |
The TIMER0 does not have a reload mode. But when you want the timer to generate an interrupt after 10 ticks for example, you can use the LOAD statement.
It will do the calculation : (256-value)
So LOAD TIMER0, 10 will load the TIMER0 with a value of 246 so that it will overflow after 10 ticks.
TIMER1 is a 16 bit counter so it will be loaded with the value of 65536-value.
See Also
NONE
Example
NONE