Action
Returns the integer part of a single or double.
Syntax
var = INT( source )
Remarks
Var |
A numeric floating point variable that is assigned with the integer of variable source. |
Source |
The source floating point variable to get the integer part of. |
The fraction is the right side after the decimal point of a single.
The integer is the left side before the decimal point.
1234.567 1234 is the integer part, .567 is the fraction
The assigned variable must be a single or double. When you want to convert a floating point data type to an integer data type, just assign the variable to a variable of that type : someLong = someDouble
See Also
Example
'-----------------------------------------------------------------------------------------
'name : round_fix_int.bas
'copyright : (c) 1995-2021, MCS Electronics
'purpose : demo : ROUND,FIX
'micro : Mega48
'suited for demo : yes
'commercial addon needed : no
'-----------------------------------------------------------------------------------------
$regfile = "m48def.dat" ' specify the used micro
$crystal = 4000000 ' used crystal frequency
$baud = 19200 ' use baud rate
$hwstack = 32 ' default use 32 for the hardware stack
$swstack = 10 ' default use 10 for the SW stack
$framesize = 40 ' default use 40 for the frame space
Dim S As Single , Z As Single
For S = -10 To 10 Step 0.5
Print S ; Spc(3) ; Round(s) ; Spc(3) ; Fix(s) ; Spc(3) ; Int(s)
Next
End