Action
Initialize the file system
Syntax
bErrorCode = INITFILESYSTEM (bPartitionNumber)
Remarks
bErrorCode |
(Byte) Error Result from Routine, Returns 0 if no Error |
bPartitionNumber |
(Byte) Partition number on the Flashcard Drive (normally 1) |
Reads the Master boot record and the partition boot record (Sector) from the flash card and initializes the file system.
This function must be called before any other file-system function is used.
See also
OPEN , CLOSE, FLUSH , PRINT, LINE INPUT, LOC, LOF , EOF , FREEFILE , FILEATTR , SEEK , BSAVE , BLOAD , KILL , DISKFREE , DISKSIZE , GET , PUT , FILEDATE , FILETIME , FILEDATETIME , DIR , FILELEN , WRITE , INPUT, AVR-DOS File System
ASM
Calls |
_GetFileSystem |
|
Input |
r24: partitionnumber (1-based) |
|
Output |
r25: Errorcode |
C-Flag: Set on Error |
Partial Example
Dim bErrorCode as Byte
bErrorCode = InitFileSystem(1)
If bErrorCode > 0 then
Print "Error: "; bErrorCode
Else
Print "Filesystem successfully initialized"
End If