Action
Appends a block of memory to the current display list memory address where the offset is specified in REG_CMD_DL.
Syntax
CmdAppend Ptr, Num
Remarks
Ptr |
Start of source commands in main memory |
Num |
Number of bytes to copy. This must be a multiple of 4 |
After appending is done, the co-processor engine will increase the REG_CMD_DL by num to make sure the display list is in order.
Example
' Pseudocode
CmdAppend 0, 40 ' Copy 10 commands from main memory address 0
Display_E ' finish the display list